QTECH QSW-8300 Инструкция по настройке - Manual (Page 172)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
171
24.3 DHCPv6 Relay Delegation Configuration
DHCPv6 relay delegation configuration task list as below:
To enable/disable DHCPv6 service
To configure DHCPv6 relay delegation on port
1. To enable DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enableDHCPv6 service.
2. To configure DHCPv6 relay delegation on port
Command Explanation
Interface Configuration Mode
ipv6 dhcp relay destination {[
address>] [interface { <interface-name> |
vlan <1-4096>}]}
no ipv6 dhcp relay destination {[
address>] [interface { <interface-name> |
vlan <1-4096>}]}
To specify the destination address of
DHCPv6 relay transmit; The no form of this
command delete the configuration.
24.4 DHCPv6 Prefix Delegation Server Configuration
DHCPv6 prefix delegation server configuration task list as below:
To enable/delete DHCPv6 service
To configure prefix delegation pool
To configure DHCPv6 address pool
(1) To achieve/delete DHCPv6 address pool
(2) To configure prefix delegation pool used by DHCPv6 address pool
(3) To configure static prefix delegation binding
(4) To configure other parameters of DHCPv6 address pool
To enable DHCPv6 prefix delegation server function on port
1. To enable/delete DHCPv6 service
Command Explanation
Global Mode
service dhcpv6 To enable DHCPv6 service.