QTECH QSW-8300 Инструкция по настройке - Manual (Page 290)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
289
mrouter-port learnpim6 function.
ipv6 mld snooping vlan <vlan-id> mrpt
<value>
no ipv6 mld snooping vlan <vlan-id> mrpt
Configure the keep-alive time of the mrouter
port. The “no” form of this command restores
to the default.
ipv6 mld snooping vlan <vlan-id> query-
interval <value>
no ipv6 mld snooping vlan <vlan-id> query-
interval
Configure the query interval. The “no” form of
this command restores to the default.
ipv6 mld snooping vlan
immediate-leave
no ipv6 mld snooping vlan
immediate-leave
Configure immediate leave multicast group
function for the MLD Snooping of specific
VLAN. The “no” form of this command
cancels the immediate leave configuration.
ipv6 mld snooping vlan <vlan-id> query-
mrsp <value>
no ipv6 mld snooping vlan <vlan-id> query-
mrsp
Configure the query maximum response
period. The “no” form of this command
restores to the default.
ipv6 mld snooping vlan query-
robustness <value>
no ipv6 mld snooping vlan query-
robustness
Configure the query robustness, the “no” form
of this command restores to the default.
ipv6 mld snooping vlan <vlan-id>
suppression-query-time <value>
no ipv6 mld snooping vlan <vlan-id>
suppression-query-time
Configure the suppression query time. The
“no” form of this command restores to the
default
ipv6 mld snooping vlan static-
group [source ]
interface [ethernet | port-channel]
no ipv6 mld snooping vlan static-
group [source ]
interface [ethernet | port-channel]
Configure static-group on specified port of the
VLAN. The no form of the command cancels
this configuration.
29.7.3 MLD Snooping Examples
Scenario 1: MLD Snooping Function