QTECH QSW-8300 Инструкция по настройке - Manual (Page 122)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
121
Switch(config-policymap-p1)#class c3
Switch(config-policymap-p1-class-c3)# set s-vid 3002
Switch(config-policymap-p1-class-c3)#exit
Switch(config-policymap-p1)#exit
Switch(config)#interface ethernet 1/0/1
Switch(config-if-ethernet1/0/1)# service-policy input p1
15.4 Flexible QinQ Troubleshooting
If flexible QinQ policy can not be bound to the port, please check whether the problem is
caused by the following reasons:
Make sure flexible QinQ whether supports the configured class-map and policy-map
Make sure ACL includes permit rule if the class-map matches ACL rule
Make sure the switch exists enough TCAM resource to send the binding
Priority of flexible QinQ and vlan ingress filtering for processing packets is: flexible QinQ > vlan
ingress filtering