QTECH QSW-8300 Инструкция по настройке - Manual (Page 102)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
101
transmit
no transmit
assigned action.
3. Apply QoS to port or VLAN interface
Command Explanation
Interface Configuration Mode
mls qos trust {cos | dscp}
no mls qos trust {cos | dscp}
Configure port trust; the no command
disables the current trust status of the
port.
mls qos cos {}
no mls qos cos
Configure the default CoS value of the
port; the no command restores the default
setting.
service-policy input <policy-map-name>
no service-policy input <policy-map-name>
Apply a policy map to the specified port;
the no command deletes the specified
policy map applied to the port. Egress
policy map is not supported yet.
Global Mode
service-policy input vlan
no service-policy input
vlan
Apply a policy map to the specified VLAN
interface; the no command deletes the
specified policy map applied to the VLAN
interface.
4. Configure queue management algorithm and weight
Command Explanation
Port Configuration Mode
mls qos queue algorithm {sp | wdrr}
no mls qos queue algorithm
Set queue management algorithm, the
default queue management algorithm is
wdrr.
Global Mode
mls qos queue wdrr weight
no mls qos queue wdrr weight
Set wdrr queue weight for all ports
globally, the default queue weight is 1 1 1
1 1 1 1 1.
5. Configure QoS mapping
Command Explanation
Global Mode
mls qos map (cos-
dp | dscp-dscp
Set the priority mapping for QoS, the no