QTECH QSW-8300 Инструкция по настройке - Manual (Page 146)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
145
SwitchA(config)#interface ethernet1/0/2
SwitchA (Config-If-Ethernet1/0/2)#anti-arpscan trust port
SwitchA (Config-If-Ethernet1/0/2)#exit
SwitchA(config)#interface ethernet1/0/19
SwitchA (Config-If-Ethernet1/0/19)#anti-arpscan trust supertrust-port
Switch A(Config-If-Ethernet1/0/19)#exit
switchB configuration task sequence:
Switch B(config)# anti-arpscan enable
SwitchB(config)#interface ethernet1/0/1
SwitchB (Config-If-Ethernet 1/0/1)#anti-arpscan trust port
SwitchB (Config-If-Ethernet 1/0/1)exit
17.4 ARP Scanning Prevention Troubleshooting Help
ARP scanning prevention is disabled by default. After enabling ARP scanning prevention,
users can enable the debug switch, “debug anti-arpscan”, to view debug information.