QTECH QSW-8300 Инструкция по настройке - Manual (Page 54)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
53
3. Assigning Switch ports for VLAN
4. Set the Switch Port Type
5. Set Trunk port
6. Set Access port
7. Set Hybrid port
VLAN Mode
name
no name
Set or delete VLAN name.
Command Explanation
VLAN Mode
switchport interface <interface-list>
no switchport interface <interface-list>
Assign Switch ports to VLAN.
Command Explanation
Port Mode
switchport mode {trunk | access | hybrid}
Set the current port as Trunk, Access or
Hybrid port.
Command Explanation
Port Mode
switchport trunk allowed vlan {WORD | all |
add WORD | except WORD | remove WORD}
no switchport trunk allowed vlan
Set/delete VLAN allowed to be crossed by
Trunk. The “no” command restores the
default setting.
switchport trunk native vlan <vlan-id>
no switchport trunk native vlan
Set/delete PVID for Trunk port.
Command Explanation
Port Mode
switchport access vlan <vlan-id>
no switchport access vlan
Add the current port to the specified VLAN.
The “no” command restores the default
setting.
Command Explanation
Port Mode
switchport hybrid allowed vlan {WORD | all | Set/delete the VLAN which is allowed by