4 voice vlan troubleshooting – QTECH QSW-8300 Инструкция по настройке User Manual
Page 74
+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
73
VLAN typical apply topology Figure
Configuration items
Configuration Explanation
Voice VLAN
Global configuration on the Switch.
Configuration procedure:
Switch 1:
Switch(config)#vlan 100
Switch(Config-Vlan100)#exit
Switch(config)#voice-vlan vlan 100
Switch(config)#voice-vlan mac 00-1f-ce-11-22-33 mask 255 priority 5 name company
Switch(config)#voice-vlan mac 00-1f-ce-11-22-55 mask 255 priority 5 name company
Switch(config)#interface ethernet 1/0/10
Switch(Config-If-Ethernet1/0/10)#switchport mode trunk
Switch(Config-If-Ethernet1/0/10)#exit
switch(Config)#interface ethernet 1/0/1
switch(Config-If-Ethernet1/0/1)#switchport mode hybrid
switch(Config-If-Ethernet1/0/1)#switchport hybrid allowed vlan 100 untag
switch(Config-If-Ethernet1/0/1)#exit
switch(Config)#interface ethernet 1/0/2
switch(Config-If-Ethernet1/0/2)#switchport mode hybrid
switch(Config-If-Ethernet1/0/2)#switchport hybrid allowed vlan 100 untag
switch(Config-If-Ethernet1/0/2)#exit
9.6.4 Voice VLAN Troubleshooting
Voice VLAN can not be applied concurrently with MAC-base VLAN.
The Voice VLAN on the port is enabled by default. If the configured data can no longer enter
the Voice VLAN during operation, please check if the Voice VLAN function has been disabled
on the port.
IP-phone1
IP-phone2
Switch