QTECH QSW-8300 Инструкция по настройке - Manual (Page 35)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
34
[sysName] [sysDesc] [sysCap]
no lldp transmit optional tlv
attribute of the port as the option value of
default values.
10. Configure the size of space to store Remote Table of the port
Command Explanation
Port Configuration Mode
lldp neighbors max-num < value >
no lldp neighbors max-num
Configure the size of space to store
Remote Table of the port as the specified
value or default value.
11. Configure the type of operation when the Remote Table of the port is full
Command Explanation
Port Configuration Mode
lldp tooManyNeighbors {discard | delete}
Configure the type of operation when the
Remote Table of the port is full.
12. Display and debug the relative information of LLDP
Command Explanation
Admin, Global Mode
show lldp
Display the current LLDP configuration
information.
show lldp interface ethernet
Display the LLDP configuration information
of the current port.
show lldp traffic
Display the information of all kinds of
counters.
show lldp neighbors interface ethernet <
IFNAME >
Display the information of LLDP
neighbors of the current port.
show debugging lldp Display all ports with LLDP debug enabled.
Admin Mode
debug lldp
no debug lldp
Enable or disable the DEBUG switch.
debug lldp packets interface ethernet
<IFNAME>
no debug lldp packets interface ethernet
Enable or disable the DEBUG packet-
receiving and sending function in port or
global mode.
Port configuration mode
clear lldp remote-table Clear Remote-table of the port.