QTECH QSW-8300 Инструкция по настройке - Manual (Page 202)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
201
switch(config)#ip dhcp snooping enable
switch(config)#interface ethernet 1/0/11
switch(Config-If-Ethernet1/0/11)#ip dhcp snooping trust
switch(Config-If-Ethernet1/0/11)#exit
switch(config)#interface ethernet 1/0/12
switch(Config-If-Ethernet1/0/12)#ip dhcp snooping trust
switch(Config-If-Ethernet1/0/12)#exit
switch(config)#interface ethernet 1/0/1-10
switch(Config-Port-Range)#ip dhcp snooping action shutdown
switch(Config-Port-Range)#
27.4 DHCP Snooping Troubleshooting Help
27.4.1 Monitor and Debug Information
The “debug ip dhcp snooping” command can be used to monitor the debug information.
27.4.2 DHCP Snooping Troubleshooting Help
If there is any problem happens when using DHCP Snooping function, please check if the
problem is caused by the following reasons:
Check that whether the global DHCP Snooping is enabled;
If the port does not react to invalid DHCP Server packets, please check that whether the port is
set as a non-trusted port of DHCP Snooping.