QTECH QSW-8300 Инструкция по настройке - Manual (Page 156)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
155
Chapter 21 Gratuitous ARP Configuration
21.1 Introduction to Gratuitous ARP
Gratuitous ARP is a kind of ARP request that is sent by the host with its IP address as the
destination of the ARP request.
The basic working mode for QTECH switches is as below: The Layer 3 interfaces of the switch
can be configured to advertise gratuitous ARP packets period or the switch can be configured
to enable to send gratuitous ARP packets in all the interfaces globally.
The purpose of gratuitous ARP is as below:
To reduce the frequency that the host sends ARP request to the switch. The hosts in the
network will periodically send ARP requests to the gateway to update the MAC address of the
gateway. If the switch advertises gratuitous ARP requests, the host will not have to send these
requests. This will reduc e the frequency the hosts’ sending ARP requests for the gateway’s
MAC address.
Gratuitous ARP is a method to prevent ARP cheating. The switch’s advertising gratuitous ARP
request will force the hosts to update its ARP table cache. Thus, forged ARP of gateway
cannot function.
21.2 Gratuitous ARP Configuration Task List
Enable gratuitous ARP and configure the interval to send gratuitous ARP request
Display configurations about gratuitous ARP
1. Enable gratuitous ARP and configure the interval to send gratuitous ARP request.
Command Explanation
Global Configuration Mode and Interface Configuration Mode.
ip gratuitous-arp <5-1200>
no ip gratuitous-arp
To enable gratuitous ARP and configure the
interval to send gratuitous ARP request.
The no command cancels the gratuitous ARP.
2. Display configurations about gratuitous ARP
Command Explanation
Admin Mode and Configuration Mode
show ip gratuitous-arp [interface vlan <1-
4094>]
To display configurations about gratuitous
ARP.