QTECH QSW-8300 Инструкция по настройке - Manual (Page 218)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
217
routing leading to BSR.
Use show ip pim rp-hash command to check if RP information is correct; if there is not RP
information, you still need to check unicast routing.
If all attempts including Check are made but the problems on PIM-
SM can’t be solved yet, then
use debug commands such debug pim/debug pim BSR please, and then copy DEBUG
information in 3 minutes and send to Technology Service Center.
28.4 MSDP Configuration
28.4.1 Introduction to MSDP
MSDP – Multicast Source Discovery Protocol, is a protocol that can learn information about
multicast source in other PIM-SM domain. The RP on which MSDP is configured will advertise
the information about the multicast sources in its domain to all the other MSDP entities through
SA messages. Thus, all the information about multicast sources in one PIM-SM domain is
spread to another. In MSDP, inter-domain information tree is used other than the shared tree. It
is required that the multicast routing protocol used for in-domain routing must be PIM-SM.
The work flow for RP in PIM-SM protocol
28.4.2 Brief Introduction to MSDP Configuration Tasks
Configuration of MSDP Basic Function
Enabling MSDP (Required)
Configuring MSDP entities (Required)
Configuring the Connect-Source interface
Configuring static RPF entities
Multicast
Application
Server
1 PIM
Register
Packet
4 Switching to
the shortest path
tree and do the
delivery
2 The
subscriber join
the group
3 The
multicast
date is
deliveried
through
the
shared
tree
Subscribe
r
R
P