QTECH QSW-8300 Инструкция по настройке - Manual (Page 195)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
194
S2(config-vlan10)#int vlan 10
S2(config-if-vlan10)#ipv6 address 2001:da8:1:::2/64
S2(config-if-vlan10)#ipv6 dhcp relay destination 2001:da8:10:1::1
S2(config-if-vlan10)#exit
S2(config)#
26.4 DHCPv6 option37, 38 Troubleshooting
Request packets sent by DHCPv6 client are multicast packets received by the device within its
VLAN, if DHCPv6 server wants to receive the packets from client, DHCPv6 client and DHCPv6
server must be in the same VLAN, otherwise it needs to use DHCPv6 relay.
Snooping option37,38 can process one of the following operations for DHCPv6 request
packets with option37,38: replace the original option37,38 with its own; discard the packets
with option37,38; do not execute adding, discarding or forwarding operation. Therefore, please
check policy configuration of snooping option37,38 on second device when obtaining the false
address or no address is obtained according to option37,38.
DHCPv6 server obtains option37,38 of the packets from client by default, if no, it will obtain
option37,38 of the packet sent by relay.
DHCPv6 server only checks whether the first DHCPv6 relay adds option37,38 that means only
option37,38 of the innermost relay-forw is valid in relay packets.