EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual - Manual (Page 26)

Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
Issue 3.1.B
15
Mode Description
Overwrite
(default) (white)
adds the media in the timeline, overwriting the existing
media from the selected position. In other words, the
media in the timeline will be removed from the insertion
point by the duration of the added media.
Insert
(orange)
adds the media in the timeline without overwriting existing
media and pushes further right the existing elements of the
timeline placed after this position.
In this mode, you can only insert the media on the clip
boundaries which are common to all selected tracks.
2.9 CHECKING THE EDIT
When the edit is completed it is possible to
check it. Xedio CleanEdit parses the timeline
for possible errors (lack of video, for
example).
If a hole is discovered a dialogue box opens
and gives a time reference on the timeline for
where there is no video.
If a fast motion clip is detected a dialogue
box opens via which you can render the fast
motion clip(s).
If you choose No:
• The Check button remains enabled, since
not-rendered fast motion clips are still
present in the edit.
• The R2B (ready to broadcast) button
remains disabled.
If the edit is checked successfully, the Check button will be disabled and the R2B
(ready to broadcast) button will be enabled. See also the section 6.3.7 ‘Checking
the Edit in the Recorder Area’, on page 76.