EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual - Manual (Page 133)

Issue 3.1.B Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
122
7.8.3 H
OW
T
O
G
O TO AND
S
ELECT
C
UE
P
OINTS
To go to a defined cue point:
• Press the cue point number on the keypad, and press ENTER.
To select a specific cue point
• Click the cue point on the Media bar.
The cue point will turn purple when selected.
7.8.4 C
ONTEXTUAL
M
ENU FOR
C
UE
P
OINTS
The contextual menu of the timecode bar gives in
addition some options for the tags and cue points,
when they are selected.
To move the nowline to the cue point on which you
have right-clicked, select the Snap Nowline to Item
command. You can also press the number
corresponding to the cue point on the keypad and
validate with ENTER.
To move the cue point on which you have right-
clicked to the nowline position, select the Snap
Item to Nowline command.