EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual - Manual (Page 126)

Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
Issue 3.1.B
115
7.6.3 D
ELETING
P
ORTIONS OF AN
E
DIT
P
ROCEDURE
To delete a portion of an edit on the timeline, proceed as follows:
1. Select the deletion mode you want to apply, using the button.
2. Place a mark IN and mark OUT to define the portion of the edit to be removed.
3. Do one of the following:
o
Click .
o
Press +
The portion of the timeline between the mark IN and mark OUT is removed.
The remaining timeline elements on the right of the deleted area are shifted left or
not, depending on the deletion mode selected.
E
XAMPLE
In the example below, the portion of the clip ADL_CLP_091208_1-01 between the
mark IN and mark OUT is deleted as you press the IN OUT Delete button. The
option Delete & Shift is active during the deletion, which means that the material
on the right of the mark OUT is shifted to the left after the Delete action.