EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual - Manual (Page 181)

Issue 3.1.B Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
170
T
EXT
A
REA
The text area allows the addition of the voiceover script on the display. A script
can be typed or added using Copy & Paste from another application. It can also be
retrieved from a MOS story through EVS ActiveX component or from the Xedio
Cutter application.
A
UDIO
M
ETER
The audio meter provides an indication of the input audio level for the microphone
when recording a voiceover. Underneath the meter is a Cfg button that displays
the audio level configuration to adjust the settings.
The volume control on the left determines the overall audio level. The microphone
level defines the level of the microphone input. The audio card fitted to the
workstation being used may offer more choices in configuring the recording
parameters, please consult the user manual for the device used for more details.
Note
The Digigram board controls the configuration for the audio inputs and
outputs of the workstation. It is therefore recommended to configure the
Digigram board as shown on the screenshots you will find in Appendix 3:
Digigram Hardware Settings.