EVS MulticamLSM Version 10.04 - January 2011 Operating Manual User Manual

Page 95

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

current picture is the Short IN point of the clip.
If all 3 keywords location are occupied, the operator has to clear some of them to

be able to assign a new keyword to that clip.
To clear one of the keywords already assigned, press CLEAR + F1 / F2 / F3 in the

secondary clip menu.
The clip can also be named based on the keywords. Press the Name function (C

key) in the secondary menu, then select keywords. The keywords will be added to

the name of the clip, up to 12 characters. In this mode, the name of the clip is

visible on the OSD. It can also be edited with the following keys:

•

CLEAR: erase the last character

•

SHIFT+CLEAR: insert a blank

•

SHIFT+F1-F10: insert a number (1, 2, 3, …, 8, 9, 0)

Once the name is complete, press ENTER to validate or MENU to cancel.
While the operator is in the secondary menu, he has full control of the current clip

with the lever, PLAY key and jog dial, so he can browse the clip and start a replay

at any time.
It is also possible to assign keywords and ranking to a clip before it is created.

Indeed, when a record train is loaded, as soon as the operator marks an IN or

OUT point, the main and secondary menu changes to make the keyword functions

available.

The SHIFT+A function of the main menu, normally used by the Reset CAM

function, can be used to define the ranking, without entering the secondary menu.

For additional functions like selecting keywords, flagging the future clip for

archiving, marking it to be pushed to another machine, defining its name from the

keywords, they can be performed from the secondary menu, exactly the same way

as for a clip already stored. All these settings are memorized and will be applied

to the clip when it is created.

PGM1 Cam A

*PRV1* Cam B

Push

PgmSpd

Sw To In

Pref

>Archive

***

Name

Cam

P.1 B.1 Clips: Local Records: Local
PL 11: < >
Msg:

***

Local

Sync Prv

2nd CTRL

Cam A

Cam B

Cam C

Cam D