EVS MulticamLSM Version 10.04 - January 2011 Operating Manual - Manual (Page 37)

EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
27
6. PGM-PRV Mode
6.1 1PGM+PRV (PRESS A FROM MAIN MENU)
At least 2 playback channels must be available to run this configuration.
This mode allows the operator to make replays with/or without transition effects
between all outputs. A string of replays can be put together and played back at the
operator’s discretion.
The LCD display is divided in two menus controlled by soft keys (A,B,C,D). To
gain access to the upper menu, press MENU from the Remote Panel.
6.1.1 S
ECONDARY
M
ENU
Aud. Met. PgmSpd Sort->TC PostRoll
Mix. Sw to IN Search Pref
Mix / Wipe L>R / Wipe R>L / Wipe U>D / Wipe D>U / Cut
These options determine the transition effect that will occur between the PGM and
PRV pictures. The mix, wipe and cut are on the same location. Pressing this
button will browse through these effects, showing the active one on the LCD menu.
Please refer to Setup menu to select the duration of the transition effect.
PGM1 CAM A *PRV1* CAM B
Aud.Met. PgmSpd Sort->TC PostRoll
Mix. Sw to IN Search Pref
P.1
B.1 Clips: LOCAL Records: LOCAL
PL 11: <
Msg:
Rst Cam Local Sync Prv 2nd CTRL
Cam A Cam B Cam C Cam D