EVS MulticamLSM Version 10.04 - January 2011 Operating Manual - Manual (Page 131)

EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
121
Command Description
A Advance Advances the beginning of the audio transition.
A Delay Delays the beginning of the audio transition.
A Fx Extend the duration of the audio transition on both sides. This
creates an audio delay or advance depending on the modification
applied to the effect duration.
A Split Perform an audio advance or delay by specifying the TC for the
beginning of the transition.
The A Base menu is similar and allows corresponding actions on video transitions.
11.15.3 OSD D
ISPLAY IN
S
PLIT
A
UDIO
M
ODE
In the Output Monitor display, additional information is also displayed when the
split audio mode is active:
The information displayed below the playback speed will display the audio
delay/advance or video delay/advance in frames depending on the editing action
applied, or ‘no split’ if no delay or advance is applied.