EVS MulticamLSM Version 10.04 - January 2011 Operating Manual - Manual (Page 193)

EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
183
Block Symbol Memory Block Status

(white)
Empty block

(steady green)
Recorded block

(blinking green)
Block in PLAY

(steady red)
Block in REC
18.3.3 G
ENERAL
P
ROCESS WITH
S
INGLE
-B
LOCK
M
EMORY
The general recording and playback process when controlling the camera using a
single-block memory is the following:
1. Start the recording on the camera by pressing RECORD on the Remote.
2. During the recording, you can set cue points on the recorded material by
pressing MARK.
3. Stop the recording in one of the following ways:
• Pressing Last cue will position the camera on the previous cue taking
the pre-roll into account.
• Jogging the dial will position the camera on the requested image.
• Pressing TAKE will only stop the recording.
4. Press PLAY to start the playback.
During the playback, the material played on the hypermotion camera is
recorded into the server via the SDI connection.