Keyer (k), Library (l) – EVS MulticamLSM Version 10.04 - January 2011 Operating Manual User Manual

Page 171

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

161

If you select Define Colour (DfC), a new screen will appear including a U-V

selection area, and an Y level selection area. Select first the color you want to

edit on the top of the screen, then select the U-V and Y values by moving the pen

on the right location of each selection area. When the adjustment is made, move

the pen to an empty zone of the screen.
The CLEAR function is also available from the Remote Panel (SHIFT + B) No

confirmation is required.

Keyer (K)

Can be selected with the pen, click on K (arrows appear/disappear) on the Paint

Mode monitor display, or press SHIFT + A on the Remote Panel menu. This

feature will cause the drawing to dissolve on and off using the dissolve duration

defined in the Setup menu (Page 1, F6)

Library (L)

Selecting L allows entering into a library where the user can load or save entire

drawings and logos.