Split screen mode, 1 vertical split, Vertical split – EVS MulticamLSM Version 10.04 - January 2011 Operating Manual User Manual
Page 183: Ertical, Plit
EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
173
PGM1 CAM A
*PGM2* CAM B
Aud.Met.
PgmSpd
Sort->TC
PostRoll
Sw to IN
Search
Pref
P.1
B.1 Clips: LOCAL Records: LOCAL
PL 11: <
Msg:
V Split
Swap
Sync
Left
Right
L & R
SHIFT
17. Split Screen mode
The Split Screen mode, which is a software option, allows a simple split screen
effect on PGM 1. This mode operates very similar to the 2PGM mode, except that
the two outputs are now left and right parts of the screen (vertical split screen) or
top and bottom part of the screen (horizontal split screen) or mixed together on
the entire screen (Split Mix mode). The Split mode also allows for DVE-like
adjustment of the video within the split effect, for optimum positioning of the
material.
Note
The horizontal Split Screen mode is not available in HD Supermotion 3x
in DVCPro HD and MPEG 2 i-frame 1080i.
17.1.1 V
ERTICAL
S
PLIT
Press
the
SHIFT key (D) to switch between normal and special commands:
Command
Description
LEFT
To control the left part of the monitor
RIGHT
To control the right part of the monitor
L & R
To control both sides together
SHIFT
Access / Exit special commands
LF
To centre the left picture
RG
To centre the right picture
V Split
Swap
Sync
<-Lf->
<-Rg->
<-WP->
SHIFT