EVS MulticamLSM Version 10.04 - January 2011 Operating Manual - Manual (Page 170)

Issue
10.04.A
EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
160
• Define: This option allows you to change the size of a circle.
Click on the Define menu and follow the instructions:
o
Set the centre of the circle
o
Set the radius
You can then choose to save or not the new circle:
• Esc: no circle is drawn.
Ellipse Drawing (0)
Select this menu to draw ellipses. A menu allows you to choose between the
following options:
• Set centre (default): a pointer appears on the screen to let you choose t he
centre of the ellipse. The shape will be the one last used or the default one if
none has been defined before.
• Define: allows you to change the shape of an ellipse, click on the “define”
menu and follow the instructions:
o
set the left corner
o
set the opposite corner
You can then choose to save or not the new ellipse.
• Esc: no ellipse is drawn.
Arrow (A)
Select A. When you draw on the tablet and remove the pen, a «neat» arrow
appears at the end of the line. This facility remains «on». Select A again.
Color & Density (D)
Select D on the Paint Mode monitor display. Choose the desired color from the
display, then choose the desired thickness.
This will be stored as Br1 or Br2 depending on which one is currently selected
when entering the ‘D’ option. Thus, two types can be stored.
Erase (E)
Selecting E on the Paint Mode monitor display allows the pen to be used as an
eraser. This facility remains «on». When no longer required, select E again to
disable it and return to the previous active drawing mode.
Clear (C)
Selecting C on the Paint Mode monitor display allows c learing of the entire
drawing. Once selected, you can choose between 3 options: Clr to clear, DfC to
define customized colors or you may escape (ESC) this function without clearing
any drawing.