EVS MulticamLSM Version 10.04 - January 2011 Operating Manual - Manual (Page 36)

Issue
10.04.A
EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
26
5.7 SECONDARY CONTROLLER
5.7.1 I
NTRODUCTION
The 2 n d CTRL function available on the Remote Panel in the main oper ational
menu allows the operator to swap the control of one or several play channels
between the EVS Remote Panel and a third-party controller.
Both controllers receive permanently the status of the channel(s), but only one
controller at a time is able to actually control a channel: this is called the
exclusive secondary control mode. The secondary controllers are defined in
Section 7 of the Remote Setup menu.
5.7.2 I
NTERACTIONS
B
ETWEEN
IPDP
AND
M
ULTICAM
When a Remote Panel and an IPDirector share the control of some PGMs in
exclusive secondary control mode, the following principles apply:
• When a playlist/timeline is controlled by the Remote Panel on a PGM, the
playlist/timeline remains the current one when IPDirector is given the control
on the PGM.
• When a playlist/timeline is controlled by IPDirector on a PGM, the
playlist/timeline remains the current playlist on the Remote Panel when the
operator takes back the PGM control.
• When several playlists/timelines have been controlled by IPDirector on several
PGMs and the operator takes back the PGM control, the current
playlist/timeline on the Remote Panel is the one that was the current playlist
when the control was given away, in other words the current playlist/timeline
does not change.
• When the playlist/timeline controlled by IPDirector is not visible by the Remote
Panel, the current playlist/timeline on the Remote Panel is the one that was
the current playlist when the control was given away, in other words the
current playlist/timeline does not change.