Edit point (a base), How to perform a video delay – EVS MulticamLSM Version 10.04 - January 2011 Operating Manual User Manual

Page 139

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

129

Edit point (A BASE)

Video is shortened in the previous clip and the video from the clip being edited is

extended.

OW TO

ERFORM A

IDEO

ELAY

In this case, the beginning of the video transition is delayed compared to the

audio transition.
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press SHIFT + A Base (B).
4. Press to highlight V DELAY (SHIFT + B)
5. At the on screen prompt, enter a value on the F_ keys including leading zeros

(0+2+1+2= 2:12), OR move the lever and press ENTER.

The value entered will be present on the PRV SCREEN when the clip is next to

play in a playlist.

Edit point (A BASE)

Video from the previous clip is extended and video from the clip being edited is

shortened.

Note
When editing using the Video IN/OUT as the reference point (V BASE) the

video will be the top line on the OSD display. When editing using the

audio IN/OUT as the reference point (A BASE) the audio will be the top

line on the OSD display.