beautypg.com

Insert, Speed, Fx dur – EVS MulticamLSM Version 10.04 - January 2011 Operating Manual User Manual

Page 111: Effect, Delete, 2 secondary menu in playlist edit mode, Introduction, Secondary menu in playlist edit mode, Econdary, Enu in

background image

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

101

I

NSERT

The Insert function (A key) allows the operator to insert a clip into the playlist.

The same operation can be achieved using the TAKE key.
See also the section 11.10.4 ‘How to Insert Clips into a Playlist’, on page 104.

S

PEED

The Speed function (B key) allows defining the speed at which one or all c lips of

playlist will be played. Select the playback speed of the clip with the lever , then

press ENTER to validate. Values are ‘Unknown’ and from 0 to 100%.
Operators have access to the secondary lever control like when clips are replayed.

While editing the speed of a clip, pressing SHIFT+Lever on the Remote allows to

access the secondary lever speed defined in the menu.

FX

D

UR

The FX Dur function (C key) sets the duration of the transition effect. The default

value that initially appears is determined by the value set in the Setup menu. The

effect duration will affect the transition at the beginning of the selected clip. Use

the lever to adjust the value, then press ENTER to confirm.

E

FFECT

The Effect function (SHIFT+C key) is used to select the type of transition effect

(Mix/Wipe/Cut/Fade). Move the lever to set the type of effect, when Effect is

highlighted. Press ENTER to validate.
For more information on the effects types, refer to the section 11.14 ‘Transition

Effects’, on page 116.

D

ELETE

The Delete function allows the operator to quickly edit a playlist by removing the

selected clip. The clip that has been «cut» can then be inserted into another

location. This clip is displayed on the second PRV output. To insert it at another

position in the playlist, simply go to that position using the jog dial and press the

Insert key (or TAKE).

11.9.2 S

ECONDARY

M

ENU IN

P

LAYLIST

E

DIT

M

ODE

I

NTRODUCTION

You can access the secondary menu of the Playlist Edit mode pressing MENU on

the Remote Panel when you are in the main menu of the Playlist Edit mode.

Clr Unav.

OtherAng

Replace

MakeLoc

Redo

Undo