Audio panel controls, Audio panel and cns – Garmin G1000 Quest Kodiak User Manual
Page 80
190-00590-00 Rev. C
Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
4-4
AUDIO PANEL AND CNS
AUDIO PANEL CONTROLS
Figure 4-2 Audio Panel Controls (GMA 1347)
17
18
15
13
11
9
20
7
5
3
1
14
2
16
4
6
8
10
12
22
24
23
21
19
NOTE:
When a key is selected, a triangular annunciator above the key is illuminated.
1
COM1 MIC – Selects the #1 transmitter for transmitting. COM1 receive is simultaneously selected when
this key is pressed allowing received audio from the #1 COM receiver to be heard. COM2 receive can be
added by pressing the COM2 Key.
2
COM1 – When selected, audio from the #1 COM receiver can be heard.
3
COM2 MIC – Selects the #2 transmitter for transmitting. COM2 receive is simultaneously selected when
this key is pressed allowing received audio from the #2 COM receiver to be heard. COM1 receive can be
added by pressing the COM1 Key.
4
COM2 – When selected, audio from the #2 COM receiver can be heard.
5
COM3 MIC – Not used in Kodiak 100 aircraft.