Garmin G1000 Quest Kodiak - Manual (Page 205)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
GPS NAVIGATION
5-89
Creating user waypoints using the Active Flight Plan Page Map:
1) With the Active Flight Plan Page displayed, push the Joystick to activate the panning function. The target
pointer is displayed at the present aircraft position.
2) After placing the pointer at the desired position, press the ENT Key. The User Waypoint Information Page is
displayed with the captured position. At this point, the User Waypoint is added to the flight plan list. If a
waypoint in the list is highlighted, the new user waypoint is placed before that waypoint, if there is no highlight,
the new user waypoint is placed at the end of the list.
3) Enter a waypoint name.
4) Press the ENT Key to accept the selected name. The first reference waypoint field is highlighted.
5) If desired, enter the identifier of the reference waypoint and the radial and distance to the reference waypoint.
6) Press the ENT Key to accept.
7) Press the FMS Knob to remove the flashing cursor.
‘Edit Flight Plan’ allows the user to edit a stored flight plan.
‘Copy Flight Plan’ copies the active flight plan to a Flight Plan Catalog location. The copy function is useful
for duplicating the active flight plan before making changes.
‘Delete Flight Plan’ removes all waypoints from the active flight plan. Deleting a flight plan does not delete
the waypoints contained in the flight plan from the database or user waypoint memory. Once the pilot is
finished with a flight plan, it can easily be deleted from the Flight Plan Catalog Page or the Active Flight Plan
Page.
‘Delete All’ removes all flight plans from memory at one time.
‘Sort by Comment’ sorts flight plans alphanumerically based upon the comment assigned to each flight
plan. Procedures on how to enter a comment (flight plan name) are described in the Active Flight Plan Page
section.