Garmin G1000 Quest Kodiak - Manual (Page 164)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-00 Rev. C
GPS NAVIGATION
5-48
C
REATING
U
SER
W
AYPOINTS
User waypoints may be created from the User Waypoint Information Page or the Navigation Map Page.
To create a new user waypoint from the User Waypoint Information Page, enter the name (identifier) and
position, or reference another waypoint by radial and distance.
Creating a new user waypoint:
1) With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor.
2) Enter a name for the new waypoint.
3) Press t he ENT Key. The message ‘Are you sure you want to create the new user waypoint’ is displayed.
4) With ‘YES’ highlighted, press the ENT Key.
5) Highlight the latitude/longitude field or the Reference Waypoints field, depending on how the waypoint is to be
defined.
6) Enter the position coordinates or the radial and distance from the reference waypoint.
7) Press the ENT Key to accept the new waypoint.
8) Press the FMS Knob to remove the flashing cursor.
Modifying a user waypoint:
1) With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor.
2) Move the cursor to the desired field.
3) Turn the small FMS Knob to make changes.
4) Press the ENT Key to accept the changes.
5) Press the FMS Knob to remove the flashing cursor.