Garmin G1000 Quest Kodiak - Manual (Page 26)

SYSTEM OVERVIEW
1-16 190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
IDENT – Press to provide special aircraft position identification to Air Traffic Control (ATC).
TMR/REF – Press to display the Timer/References window.
NRST – Press to display the Nearest Airports window.
ALERTS – Press to display the Alerts window.
1.3 MFD SOFTKEYS
ENGINE – Pressing this softkey makes available the Engine Page functions. Refer to the Engine Indication System section.
MAP – Pressing this softkey enables the following softkeys:
TRAFFIC – Pressing this softkey displays/removes Traffic on the Navigation Map.
TOPO – Pressing this softkey displays or removes topographic information on the Navigation Map.
TERRAIN – Pressing this softkey displays/removes terrain and obstacle data on the Navigation Map.
Figure 1-14 MFD Softkeys
MAP DCLTR
TRAFFIC TOPO TERRAIN
DCLTR-2
DCLTR-3
DCLTR-1
BACK
Press to return to the
top softkey level
CHKLIST
EXIT EMERGCY ENGINE
DCLTR MAP ENGINE CHKLIST
CLR
DONE
The DONE softkey changes to UNDO when the checklist
item is already checked
STRMSCP NEXRAD XM LTNG
(optional) (optional) (optional)
BACK ENGINE
ENGINE
ENGINE BACK SYSTEM
Press the BACK softkey on this level to
return to the top softkey level
RST FUEL DEC FUEL INC FUEL
(optional)
FUEL
SYSTEM FUEL
STRMSCP (optional) – Pressing this softkey displays/removes Stormscope lightning data on the Navigation Map.
NEXRAD (optional) – Pressing this softkey displays/removes precipitation data on the Navigation Map.
XM LTNG (optional) – Pressing this softkey displays/removes XM Radio lightning data on the Navigation Map.
BACK – Pressing this softkey displays the ENGINE and MAP top level softkeys.
DCLTR (declutter) – Pressing this softkey removes map information in three levels.