Garmin G1000 Quest Kodiak - Manual (Page 149)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
GPS NAVIGATION
5-33
Selecting a Direct-to destination to a flight plan waypoint:
1) While navigating an active flight plan, press the Direct-to Key.
2) Turn the small FMS Knob to the left to display a list of flight plan waypoints as shown in Figure 5-28.
Figure 5-28 Flight Plan Waypoint List
3) Select the desired waypoint.
4) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
5) Press ENT again to activate a Direct-to.
Selecting a Direct-to destination to a nearest airport:
1) Press the Direct-to Key.
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-29. The list
is only populated when navigating a flight plan.
Figure 5-29 Nearest Airport List
3) Select the desired airport.
4) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
5) Press ENT again to activate a Direct-to.