Garmin G1000 Quest Kodiak - Manual (Page 195)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
GPS NAVIGATION
5-79
Loading a departure procedure using the PROC Key:
1) From the Active Flight Plan Page, press the PROC Key. The Procedures Options Menu is displayed.
2) Highlight ‘SELECT DEPARTURE’ from the list (Figure 5-67).
3) Press the ENT Key. The DEPARTURE window is displayed on the ‘PROC – DEPARTURE LOADING Page.
4) Select a departure.
5) Press the ENT Key. The RUNWAY window may be displayed.
6) Select a runway.
7) Press the ENT Key. The TRANSITION window may be displayed.
8) Select a transition.
9) Press the ENT Key.
10) With ‘LOAD’ highlighted, press the ENT Key. The departure procedure is displayed as part of the overall flight
plan and is placed in front of the enroute flight plan.
Figure 5-67 Selecting a Departure from the Procedures Window