Garmin G1000 Quest Kodiak - Manual (Page 156)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-00 Rev. C
GPS NAVIGATION
5-40
Viewing information:
1) Select the Departure, Arrival, or Approach Information Window.
2) Press the MENU Key.
3) Highlight ‘View Info’.
4) Press the ENT Key. The Airport Information Window is displayed.
Creating user waypoints via the Airport Information Page Map:
1) With the Airport Information Page displayed, push the Joystick to activate the panning function. The target
pointer is displayed at the center of the map.
2) After placing the pointer at the desired position, press the ENT Key. The User Waypoint Information Page is now
displayed with the captured position.
3) Enter a waypoint name.
4) Press the ENT Key to accept the selected name. The first reference waypoint field is highlighted.
5) If desired, enter the identifier of the reference waypoint and the radial and distance to the reference waypoint.
6) Press the ENT Key to accept.
7) Press the FMS Knob to remove the flashing cursor.