Garmin G1000 Quest Kodiak - Manual (Page 276)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-00 Rev. C 6-44
HAZARD AVOIDANCE
CURRENT TRAFFIC MODE
S
TANDBY AND
O
PERATE
Once the aircraft is airborne, TIS switches from Standby to Operating mode. The G1000 displays ‘TIS
OPERATING’ in the upper left corner and begins to display traffic on the Traffic Map Page. TIS Traffic
Advisories (TA) are issued to alert the crew to intruding aircraft.
Once the aircraft is on the ground, TIS switches from operating mode to standby mode. The Traffic Map
Page displays ‘STANDBY’. The pilot can use the page menu or softkeys to switch between Standby (STBY)
and Operating (ON) modes and manually override automatic operation.
Switching between operating modes:
1) Select the Map Page Group.
2) Select the Traffic Map Page.
3) Press the STANDBY or OPERATE Softkey to switch between modes. ‘TIS STANDBY’ or ‘TIS OPERATING’ is
displayed in the status box in the upper left corner of the Traffic Map Page.
OR :
1) Press the MENU Key. The page menu displays ‘Standby Mode’ or ‘Operate Mode’.
2) Press the ENT Key.