Garmin G1000 Quest Kodiak - Manual (Page 228)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-00 Rev. C
GPS NAVIGATION
5-112
DEPARTURES, ARRIVALS, AND APPROACHES (PFD)
The Procedures Window (Figure 5-93) provides direct access to departures, arrivals and approaches — based
upon the active flight plan or direct-to destination. In either case, the departure and destination airports must
have published procedures associated with them. The Procedures Window is displayed and removed by pressing
the PROC Key .
Figure 5-93 Procedures Window
SELECT DEPARTURE
‘Select Departure’ selects a published standard instrument departure (SID) for the departure airport or
replaces the current departure with a new selection. When using a direct-to, the G1000 uses the nearest
airport as a reference when displaying available departures.
Figure 5-94 Selecting a Departure
Available
Departures
Available
Transitions
Available
Runways
Selecting a departure for the departure airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT DEPARTURE’.
3)
Pr ess the ENT Key.
4) Enter an identifier, city, or facility name.
5) Pr ess the ENT Key until the departure field is highlighted .
6) Select the desired departure.
7)
Pr ess the ENT Key. A window appears listing the available transitions for the departure.