Garmin G1000 Quest Kodiak - Manual (Page 218)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-00 Rev. C
GPS NAVIGATION
5-102
12) Press the ENT Key. ‘LOAD?’ is highlighted.
13) Press the ENT Key. The departure will be active when the flight plan is active.
OR::
1) With the Departure Loading Page displayed (Figure 5-88), press the FMS Knob to activate the cursor.
2) Enter an identifier, facility name or city location field.
3) Press the ENT Key until the DEPARTURE window is displayed.
4) Select a departure.
5) Press the ENT Key. The RUNWAY window may be displayed.
6) Select a runway.
7) Press the ENT Key. The TRANSITION window may be displayed.
8) Select a transition.
9) Press the ENT Key. The departure is now ready to load.
10) Press the FMS Knob to remove the cursor.
Figure 5-88 Departure Loading Page
Identifier
Facility Name
Location
Available
Departures
List of Legs
in Departure
Sequence
Map Showing
Selected
Departure
Airport
Symbol
Airport Usage