Garmin G1000 Quest Kodiak - Manual (Page 201)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
GPS NAVIGATION
5-85
S
AVING
(S
TORING
)
THE
A
CTIVE
F
LIGHT
P
LAN
Figure 5-72 Store Flight Plan Confirmation Box
Whenever an approach, departure, or arrival is loaded into the active flight plan, a set of approach,
departure or arrival waypoints is inserted into the flight plan along with a header line describing the
instrument procedure the pilot selected. The original enroute portion of the flight plan remains active
(unless an instrument procedure is activated) when the procedure is loaded.
Flight plans can also be stored with an approach, departure, or arrival. The active flight plan is erased
when the system is turned off and overwritten when another flight plan is activated. When storing flight
plans with an approach, departure or arrival, the G1000 uses the waypoint information from the current
database to define the waypoints. If the database is changed or updated, the G1000 automatically updates
the information if the procedure has not been modified. If an approach, departure or arrival procedure is
no longer available, the procedure is deleted from the flight plan and an alert is displayed.
Storing an active flight plan:
1) From the Active Flight Plan Page, press the MENU Key.
2) Highlight ‘Store Flight Plan’.
3) Press the ENT Key.
4) With ‘OK’ highlighted, press the ENT Key (Figure 5-72). The flight plan is stored in the next available position
in the flight plan list on the Flight Plan Catalog Page.
I
NVERTING THE
A
CTIVE
F
LIGHT
P
LAN
‘Invert Fight Plan’ reverses the active flight plan. After navigating along a flight plan, the route can be
reversed for navigation guidance back to the original departure waypoint.
Inverting and activating an existing flight plan:
1) From the Active Flight Plan Page, press the MENU Key.
2) Highlight ‘Invert Flight Plan’
3) Press the ENT Key. The ‘Invert Flight Plan?’ window is displayed.
4) Select ‘OK’.
5) Press the ENT Key. To cancel the operation, highlight ‘Cancel’ and press the ENT Key.