Garmin G1000 Quest Kodiak User Manual
Page 142
Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
190-00590-00 Rev. C
GPS NAVIGATION
5-26
OPERATIONS
The following Inset Map operations can be performed (operations are performed independently of the
MFD):
• Changing the zoom range
• Changing the declutter level
• Map panning
To change the Inset Map zoom range, turn the
joystick
clockwise to increase or counterclockwise to decrease
the range. Zoom ranges from 500 feet to 2,000 nautical miles. To change the declutter level, press the
INSET
Softkey. Press the
DCLTR
Softkey to remove background map details until the desired amount of detail is
displayed. The declutter level appears in the Softkey (i.e., DCLTR-1).
Panning the map:
1)
Push in the
Joystick to display the map pointer. The map can now move beyond its current limits without
adjusting the range.
2)
Move the Joystick to pan the map in the general direction of the desired location. When the pointer is placed
on an object, the name of the object is highlighted for approximately 4 seconds (even if the name was not
originally displayed on the map). This feature applies to everything displayed on the map except for route
lines.
3)
Push in the Joystick to cancel the panning function and return to the present position on the map.