Garmin G1000 Quest Kodiak - Manual (Page 230)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-00 Rev. C
GPS NAVIGATION
5-114
SELECT APPROACH
‘SELECT APPROACH’ selects a published instrument approach for the destination airport or replaces the
current approach with a new selection.
Figure 5-96 Selecting an Approach
Available
Approaches
Available
Transitions
Selecting an approach for a direct-to or flight plan destination airport (Figure 5-96):
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT APPROACH’.
3)
Pr ess the ENT Key.
4) Enter an identifier, city, or facility name.
5) Pr ess the ENT Key until the approach field is highlighted .
6) Select the desired approach.
7)
Pr ess the ENT Key. A window appears listing the available transitions for the approach.
8) Select the desired transition or vectors.
9)
Pr ess the ENT Key.
10) Wi th ‘LOAD?’ highlighted, press the ENT Key to load the approach OR: to activate the approach, highlight ‘ACTIVATE?’.
NOTE: If the approach is not approved for GPS, a ‘NOT APPROVED FOR GPS’ message is displayed with ‘YES’
highlighted. Press the ENT Key to acknowledge the message. To cancel the approach, select ‘NO’ and press
the ENT Key.