Garmin G1000 Quest Kodiak - Manual (Page 63)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 2-19
FLIGHT INSTRUMENTS
OUTSIDE AIR TEMPERATURE
The Outside Air Temperature (OAT) is displayed in degrees Celsius (°C) by default in the lower left of the PFD
under normal display conditions, or below the true airspeed in reversionary mode.
Figure 2-29 Outside Air Temperature
Normal Display Reversionary Mode
Changing temperature display units:
1) Select the AUX - System Setup Page using the FMS Knob.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the ‘Temp’ field.
4) Turn the small FMS Knob to select the desired unit.
5) Press the ENT Key to confirm the selection.
Figure 2-30 System Setup Page,
Display Units Settings