Garmin G1000 Quest Kodiak - Manual (Page 209)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
GPS NAVIGATION
5-93
Performing automatic waypoint fuel planning operations:
1) The current page mode is displayed at the top of the page, ‘AUTOMATIC’ or ‘MANUAL’. Select the AUTO
Softkey.
2) For direct-to fuel planning, select the WPTS Softkey and enter the flight plan departure airport (FROM) in the
waypoint field (P.POS; present position).
3) Select the ENT Key and the flashing cursor moves to the ‘to’ waypoint field.
4) Enter the identifier of the ‘to’ waypoint and select the ENT Key to accept the waypoint.
Once the ‘to’ waypoint is entered, fuel statistics for the direct-to are displayed, no manual input of data
is required.
Figure 5-78 Waypoint Mode
Flight Plan Field
Not Accesible
For fuel planning using a stored flight plan instead of direct-to waypoints, follow the steps previously
given for waypoint fuel planning except enter a desired flight plan number and/or a desired leg of the flight
plan instead of waypoints (Figure 5-79).
Figure 5-79 Flight Plan and Leg Number Fields