Xerox 4090 User Manual
Xerox Printers
Table of contents
Document Outline
- Notices
- Table of contents
- Introduction
- Overview
- Setting up the LPS
- Setting up print job sources
- -track magnetic tapes
- Write protection of 9-track magnetic tapes
- Control panel switches
- Powering on the tape drive
- Loading a 9-track tape
- Placing a tape online to the LPS
- Taking a tape offline from the LPS
- Unloading a tape
- Powering off the tape drive
- Locating CTS components
- Powering on the 180 CTS
- Loading a tape
- Loading a 1/4-inch cartridge tape
- Placing a tape online to the LPS
- Unloading a tape
- Taking a tape offline from the LPS
- Powering off the CTS
- Placing the LPS online
- Taking the LPS offline
- Starting HIP
- Selecting a communication mode
- Changing hosts
- Placing HIP online
- Taking HIP offline
- -track magnetic tapes
- Printing jobs
- Printing task flow overview
- Starting an offline or online print job
- Starting a print job through HIP
- Selecting reports within a job
- Printing multiple copies of large jobs
- Checking printer status
- Checking the HIP job queue status
- Checking job status
- Aborting a print job
- Ending a print job
- Interrupting a print job
- What to do when the system stops printing
- Resuming an interrupted print job
- Stopping a HIP print job
- Printing task flow overview
- Print job maintenance
- Adding dry ink
- Displaying cluster status
- Modifying current trays
- Redefining the preferred trays
- Assigning all system trays to a cluster
- Changing the stock in a tray assigned to an active cluster
- Error conditions
- Using the FEED command
- Changing the output tray specification while the job is printing
- Unloading dual stacker trays
- Unloading the stitcher/stacker tray
- Unloading the sample tray
- Adding dry ink
- Printer maintenance
- Shutting down the LPS
- Solving problems
- Aid to problem solving
- -track magnetic tape drive on the controller cabinet problems
- Additional diagnostic tests
- Clearing area 1A
- Clearing area 2A
- Clearing areas 6 and 6A
- Clearing area 7
- Clearing areas 8 and 9
- Clearing areas A and B
- Frequent paper misfeeds
- System rollover recovery
- Recovery in an online system
- Using the PROBLEM command before placing a service call
- Information to have at hand when calling
- A. Paper
- B. Meter reading and reporting
- Glossary
- Index