Xerox 4090 - Manual (Page 20)

OVERVIEW
Figure 1-5. Printer with the stitcher/stacker option
Both stacker options also provide a sample tray for additional
limited output. The sample tray receives sample prints, rejected
pages, and transparencies.
The printer has two feed trays, shown in figure 1-5. Your LPS
may also have an optional high-capacity feeder, which adds two
feed trays to your system for a total of four feeder trays.
The printer control console shown in figure 1-6 displays
important messages, attention signals, and information about the
setup of your system. The printer control console also contains a
graphic mimic of the system for finding the location of paper
jams.
Figure 1-6. Printer control console
1. Message display
2. Graphic display
3. Information button
4. Print quantity display
5. Stop button
6. Continue button
7. Wire percentage indicator
8. Feeder tray indicators
9. Sample button
10. Power on/off switch
Message display: Shows printer status and simple operating and
maintenance instructions.
1-6 XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE