Xerox 4090 - Manual (Page 61)

PRINTING JOBS
Figure 4-2. HIP job status display
Host:XNS: READY HIP: STARTED Filemode: All Jobs
JID# Host name Received Status Job# Time
1 HLCA016 - Bl 13:16:28 Completed 485 13:18:18
2 HLCA016 - Bl 13:16:37 Completed 486 13:19:04
3 HLCA051 - Fa 13:16:49 Completed 487 13:20:30
4 HLCA051 - Fa 13:17:12 Completed 488 13:21:53
5 HLCA052 - Fa 13:17:33 Completed 489 13:23:07
6 HLCA052 - Fa 13:17:55 Completed 490 13:24:12
7 HLCA053 - Fa 13:18:20 Printing 491 13:23:42
8 HLCA054 - Fa 13:18:44 Active 492 13:24:34
HP1110 End of job display.
The following are the descriptions of the status messages for the
HIP job queue display:
RECEIVE The job is currently being received.
SENDING The job is currently being sent.
PENDING The job is waiting to be sent.
QUEUED The job is in the OCS job queue waiting to
be processed.
ACTIVE The job is being processed by input or
output.
OQUEUED The input phase is complete, and the job is
queued for printing.
PRINTING The input phase is complete, and printing is
in progress.
TRUNCATED The transfer was ended before completion.
COMPLETED The job was completed normally.
STORED The file was stored in a permanent file
directory.
SENT The file was successfully sent to the host.
ABORTED The job was aborted using an HIP or OCS
ABORT command.
HOSTABORT The job was aborted using the host
command.
REJECTED The transfer from the host to the OEM was
rejected.
CANCELLED The transfer was cancelled by a host restart.
Note: If the status message shows TRUNCATED, the data
transfer may have ended before it completed. Check the output
and resend the job if necessary.
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE 4-9