Xerox 4090 - Manual (Page 42)

SETTING UP PRINT JOB SOURCES
Locating CTS components
Figure 3-6 shows the components of the CTS.
Figure 3-6. Components of the CTS
1 Tape transport
The tape transport is where the tape is processed (read/write
functions) and includes the status and control panel. You
can have one or two tape transports in your cartridge.
2 Power control panel
A description of the switches on the control panel, shown in
figure 3-7, is provided below.
Figure 3-7. Control panel switches
1 Emergency Power Off (EPO) switch
Pressing the EPO switch starts an uncontrolled power down
that can result in lost data and system problems. Once you
press the EPO switch, you must place a service call, because
only a service representative can restore power to the
system.
3-14 XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE