Xerox 4090 - Manual (Page 112)

PRINTER MAINTENANCE
c. Release the fuser drawer by pressing down on the green
latch (A).
d. Push the fuser drawer in until it latches in place.
16. Close the processor doors.
17. Remove the gloves. Do not let any residue come in contact
with your skin. Dispose of the gloves in a trash receptacle.
18. Power on the printer.
19. Wash your hands.
Setting the time and date
The system must be idle when setting the system time and date.
(Idle means offline, not printing, and not performing any
nonprinting tasks.)
You must also log on to level 2 to use the SETTIME command.
To change the time or date display without rebooting the
system, enter the following SETTIME command:
SETTIME [date][time]
[date]
Specifies the date to set as the system date. Use the
mm/dd/yy or mm-dd-yy format. Months may be expressed as
numbers or using the common three-character abbreviations.
6-24 XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE