Xerox 4090 - Manual (Page 38)

SETTING UP PRINT JOB SOURCES
2. Press the file reel latch until it clicks, to relatch the hub and
lock the reel in place.
3. Carefully unwind about 3 to 4 feet (1 meter) of tape from the
reel. Loosely drape it over the top of the upper air bearing.
Leave some slack between the reel and the air bearing.
CAUTION: When handling the tape, try to touch only the
edges and never handle the tape beyond the BOT reflective
strip. You could damage or destroy data beyond that point.
4. Insert the tape sideways into the slot between the head
covers. Gently guide it beneath the lower air bearing and
drape it over the top of the fixed reel.
CAUTION: Make sure that the tape is correctly positioned
over all tape path components or tape damage may occur.
3-10 XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE