Xerox 4090 User Manual

Page 135

Text mode
Original mode

SOLVING PROBLEMS

Only clean the feed belt to correct a problem, not as a routine
maintenance procedure.

Follow these steps to clear the feed belt:

1. Clear any misfeeds that have occurred but do not relatch the

paper feeder assembly.

The paper feeder assembly must be unlatched to clean the
belt. If necessary, unlatch it by pressing down on the bright
green lever on the right side of the paper tray.

2. Clean the belt.

Lightly moisten a lint-free towel with cleaning solution and
wipe the outside surface of the feed belt thoroughly in the
same direction as the ribs on the belt. Allow a few seconds
for the cleaning solution to evaporate.

XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE

8-17