Xerox 4090 - Manual (Page 118)

SHUTTING DOWN THE LPS
This affects the entire system: the printer as well as the
system controller. Do not press the On/off switch on the
printer.
Offline
Follow these steps to power off the LPS if your system is
receiving jobs from an offline source:
1. Press to determine if the system is idle.
2. Unload the tape, cartridge, or diskette. For more information
on unloading tapes and cartridges, refer to the relevant
section in the “Setting up print job sources” chapter.
CAUTION: If a tape or cartridge is loaded when the system
Power Off button is pressed, data on the tape or cartridge
could be destroyed.
3. Press the System Power Off button on the system controller
panel.
This turns off the entire system: the printer as well as the
system controller. Do not press the On/off switch on the
printer.
7-2 XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE