Xerox 4090 User Manual
Page 22
OVERVIEW
18-track cartridge tape system (180 CTS)
The 18-track cartridge tape system (180 CTS) offers alternative or
additional offline capability for inputting print and nonprint data
to the LPS. It reads and writes IBM- and ANSI-compatible 1/2-
inch/13 mm tape in the 18-track IBM 3480 data format.
Figure 1-8.
18-track cartridge tape system
1
Single transport configuration
2
Dual transport configuration
1/4-inch cartridge tape drive
The 1/4-inch cartridge (QIC) tape drive is also mounted within
the system controller cabinet. This unit provides an alternative
source for loading and backing up user files and loading or
unloading fonts to the system disks.
The capacity of the 1/4-inch cartridge tape drive is either 320 MB
or 525 MB, depending on the choice of DC6320 or DC6525 tape
cartridges. Both tapes are 1/4-inch cartridge ANSI compatible,
and they can be used interchangeably without hardware or
software recognition.
High-capacity feeder
The high-capacity feeder (HCF) is an option that can be added to
your printer. This option increases efficiency and allows you to
use specialized applications. The LPS base configuration includes
two feeder trays (feeder trays 1 and 2). The HCF option provides
two additional feeder trays (feeder trays 3 and 4), increasing the
feeder capacity by approximately 2,000 sheets.
1-8
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE